Product information “Centrifugal immersion pump B50”
Drive shaft: Stainless steel (1.4571)
met roestvrijstalen aandrijfas
Description:
When circulating chemicals and pickling baths, reliability, safety and last but not least functionality are important. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid emptying of these liquids from tanks and basins.
- available in special immersion depths on request
- equipped with self-lubricating, liquid-wetted plain bearings.
Features & Advantages
- High flow rate
- High efficiency
- Smooth running
- Low space requirement
- Easy commissioning
- Easy to maintain
Technical data
| Pump tube (material): |
PP (polypropylene) |
| Impeller (material): |
PPO (Polyphenylenoxid) / PPE (Polyphenylenether) |
| Static seal (material): |
FPM (fluororubber) |
| Mechanical seal (material): |
Kohle, SiC, HC-4 (2.4610) |
| Drive shaft (material): |
Edelstahl (1.4571) |
| density (up to kg/dm³): |
1.8 |
| Viscosity (up to max. cps)*: |
up to 100 cps (e.g. milk) |
| Type of impeller: |
Radial-flow impeller |
| Seal type: |
Mechanical seal (MS) |
| Thread (inch) outside: |
1 1/2″ |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
