Description
Product information “Drum pump Lutz B2 Vario PVDF”
Immersion depth: 500 mm (sealless)
Description:
The Pump Set B2 Vario is suitable for low viscosity acids, alkalis and chemicals. The set is suitable for the removal of small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources.
- Stepless speed regulator for transferring and filling small quantities
Features & Advantages
- sealless design (DL) conditionally dry-running safe
- infinitely variable
- powerful Motor with improved service life.
- easy to service and dismantle
Technical data
▼ MEDIUM ▼
| Suitable media: | Salpetersäure, Perchlorsäure, Naphthalin, Natriumhypochlorit |
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
| Pump tube (material): | PVDF (polyvinylidene fluoride) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | no seals in contact with the medium |
| Mechanical seal (material): | no seals in contact with the medium |
| Bearing (material): | ETFE / PTFE |
| Drive shaft (material): | Hastelloy C (2.4610) |
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
| Flow rate (up to max. GPM)*: | 18,5 |
| delivery head (up to max. ft)*: | 21,3 |
| Temperature of medium (max °F): | 194 |
| density (up to kg/dm³): | 1.3 |
| Viscosity (up to max. cps)*: | 300 |
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
| Type of impeller: | Axial-flow rotor |
| Seal type: | Sealless (SL) |
| Immersion length: | up to 19″ (500 mm) |
| Immersion tube diameter (up to mm): | 1.26 |
| Thread (inch) outside: | 1″ |
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
| Type of drive: | Electric |
| Output (W): | 180 |
| Voltage: | 120 |
| Frequency (Hz): | 60 |
| Version: | mit Drehzahlsteller |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
