Eccentric screw pump tube HD-E in PURE version

for mineral oils, paints, food and cosmetic products

Order number: US-0155-010 + 0155-016
Price: upon request

SKU: Eccentric screw pump tube HD-E in PURE version Categories: ,


Product information “Eccentric screw pump tube HD-E in PURE version”

Version: PURE with EPDM seal


The Eccentric screw pump HD-E in PURE design transfers the advantages of the Drum pump for low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with Mechanical seal and a free-running shaft with an eccentric screw as conveying element – all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources.

  • also available in special immersion depths
  • Pump tube equipped with Lutz original handwheel
  • Examples of media: viscous cosmetic products, food and etc.

Features & Advantages

  • Smooth running
  • Uniform volume flow
  • Easy and quick cleaning
  • Gentle, low-pulsation product conveying
  • Low wear
  • Easily detachable outer tube
Technical data
Pump tube (material): Edelstahl (1.4571)
Static seal (material): EPDM
Mechanical seal (material): SIC, Kohle, EPDM
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
Flow rate (up to max. GPM)*: 5
delivery head (up to max. psi)*: 58
Temperature of medium (max °F): 212
Viscosity (up to max. cps)*: up to 4.000 cps (e.g. shampoo)
Seal type: Mechanical seal (MS)
Immersion length: from 39″ (1000 mm)
Immersion tube diameter (up to mm): 1.6
Connection: Tri-Clamp
Certification: FDA-compliant, Verordnung (EG) 1935/2004
Type: B70V-H-SR Sanitary Plus

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Additional information


"PURE version with FPM seal", "PURE version with EPDM seal"