for Pump tube PVDF
The foot strainer can be used for Pump tubes PP, PVDF, aluminum and stainless steel. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
- to be plugged onto the pump base, as well as the suction pipe with Ø 41mm
Features & Advantages
- Prevents impurities from entering Pump tube by filtering them out
- Outer tube diameter 55mm
- Mesh size 20 x 2 mm
|Produktgruppe:||Fasspumpen / Containerpumpen, Membranpumpen|
|Accessories group:||Adapter / Foot strainers|
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter