Hose connection Tri-Clamp

DN 19

Order number: 0204-871
Price: op verzoek
When using a B70 eccentric screw pump, an additional DN 50 reducer to DN 32 and a closing clamp are required.

SKU: Hose connection Tri-Clamp Categories: , ,


Product information “Hose connection Tri-Clamp”

Design: for Hose DN 38 (1 1/2″)
Seals: EPDM
Material: Stainless steel (1.4404)


The Tri-Clamp hose connector is required for connecting the delivery hose to the pump, nozzle, discharge elbow or Tri-Clamp fittings (consisting of hose barb, locking clip and gasket).

  • for eccentric screw pumps, barrel pumps or double diaphragm pumps (Pure stainless steel)

Features & Advantages

  • Material: stainless steel (1.4404)
  • for hoses with nominal diameters DN 19 / DN 25 / DN 32 / DN 38
Technical data
Produktgruppe: Fasspumpen / Containerpumpen, Exzenterschneckenpumpen
Accessories group: Hose connection / Hose clips

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Additional information




"for hose DN 19 (3/4“)", "for hose DN 25 (1")", "for hose DN 32 (1 1/4")", "for hose DN 38 (1 1/2")"