Pump tube B200 PVDF

for concentrated acids and alkalis

Description

Product information “Pump tube B200 PVDF”

Version: with leakage detection
Seal type: Mechanical seal (MS)


Description:

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps.
Perfectly suited for the discharge of concentrated acids and alkalis.

  • Optionally with leakage detection (Safety Box)
  • Horizontal connection at the bottom of the container
  • IBC connection: 2″ NPS

Features & Advantages

  • Optionally with electric or compressed air drive
  • Low loss of medium when disconnected
  • Easy to install
  • Easy to dismantle
  • Small footprint
  • Automatic emergency stop function of the motor in case of leakage detection
Technical data
▼ MEDIUM ▼
Suitable media: Fluorwasserstoffsäure, Salpetersäure, Kaliumbromat, Dimethylphthalat, Bromsäure, Schwefelsäure
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PVDF (polyvinylidene fluoride)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): Carbon, SiC, FPM, HC-4 (2.4610)
Bearing (material): ETFE / PTFE
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 57
delivery head (up to max. ft)*: 52
Temperature of medium (max °F): 212
density (up to kg/dm³): 2.8
Viscosity (up to max. cps)*: 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Axial-flow rotor
Seal type: Mechanical seal (MS)
Immersion tube diameter (up to mm): 41
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Version: mit Leckageerkennung
Type: B200 PVDF 41-R-GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Additional information

Version:

"without leakage detection", "with leakage detection"

TOP