Tube integration

with Tri-Clamp DN 32

Order number: 0204-861
Price: op verzoek
Suitable for pumping flammable and combustible liquids (e.g. ethanol, petrol) or in potentially explosive atmospheres.

SKU: Tube integration Categories: , ,

Description

Product information “Tube integration”

Material: Stainless steel (1.4404)
for Hose with nominal width: DN 50 (2″)
Seal: FPM
Info: 
Can also be used for non-Ex applications in conjunction with PVC spiral hose, fabric-reinforced and universal chemical hose.


Description:

For connecting conductive delivery hoses to the pump, nozzle/outlet elbow or Tri-Clamp fittings in hazardous areas. The hose connection ensures a good conductive transition between the conductive Hose and the pump/fitting. The ohmic resistance between fittings must be less than 106 ohms. The hose ibbin consists of a hose barb, a clamp shell, a locking clip and a gasket.

  • for Eccentric screw pumps

Features & Benefits

  • Stainless steel materials (1.4404)
  • only suitable in combination with the universal chemical hose
  • according to the standard DIN EN 12 115
Technical data
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Produktgruppe: Fasspumpen / Containerpumpen, Exzenterschneckenpumpen
Accessories group: Hose connection / Hose clips

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Additional information

Seals:

"FPM", "EPDM"

Version:

"for hose DN 19 (3/4“)", "for hose DN 25 (1")", "for hose DN 32 (1 1/4")", "for hose DN 38 (1 1/2")", "for hose DN 50 (2")"

TOP